Tag Archives: worm gear worm

Siemens price Simogear Helical Worm Gear Motors and Gear Units with ce certificate top quality low price

Product Description

Introduction 
Helical worm gear units are part of the SIMOGEAR modular system which essentially comprises bevel CZPT cal, parallel shaft, CZPT units or mechanically variable speed drives. With three or single phase AC motors with or without brake, all imaginable drive combinations up to electronic speed variable drives are possible 

Helical CZPT units are designed for continuous duty under the most arduous operating conditions.

The solid gear housings made of high grade cast-iron are more stable and dampen vibrations.
An additional cover is not necessary to assemble the gear parts in the housing. For this reason this CZPT have a special high stiffness. 

Lubricant loss and entry of dust and water are effectively pre- vented by radial shaft seals with dust and protective lips.

The gears of the CZPT cal stages are hobbed, case hardened and profile ground or honed. Furthermore, gear theeth are profile corrected and crow- ned for optimum performance.

The concave gear wheel set of the CAVEX® are also used for CZPT stage. This CZPT wheel is made of centrifugally cast high grade Bronze GZ-CuSn12Ni. The CZPT s are case hardened and grounded.

The concave tooth system of the CAVEX® worm gear units are subjected to only specific profile pressure and this provides particularly favourable positon of the lines of contact which extends mainly at right angles to the sliding direction.That is to say that lubrication pressure is particularly required to decrease the wear and tear and to increase the efficiency.

The output and input shafts are in right angle position. 

Design Variations

The standard unit is CZPT for use in all mounting positions. 

The CZPT es are manufactured as solid shaft CZPT es or as hollow shaft CZPT es with tted key, shrink disc or splined shaft connections.

Recessing shafts, which t in the hollow shafts on the CZPT preference series, are to be made from a higher strength material,like 42CrMo4, 16MnCr5 or similar. 

Data required for selection 
The following data is required in order to select the correct gearbox:

1. Type of driven machine
2. CZPT operating time h
3. Required input CZPT kW or required torque Nm
4. Required output speed n 2 of the geared motor rpm or gearbox ratio i
5. Operating voltage V and frequency Hz
6. Operating mode, number of startings, inverter-fed operation, type of startup
7. Moment of inertia J Load kgm2 of the driving machine reduced to the motor shaft
8. Type of CZPT transmission on gearbox shafts (direct, coupling, belt, chain, gear wheel)
9. Radial force F r N at the input shaft and direction of force with distance from the shaft shoulder to the point of application and axial forceFax [N] with direction of force
10. Ambient temperature oC
11. Degree of protection
12. Mounting position
13. Required braking torque Nm
14. Any regulations (CSA, VIK, etc.) 

Best shop Light Weight Worm Gear Manual Lift Mechanisms, Mini Screw Jacks Heavy Duty Manufacturer with ce certificate top quality low price

Product Description

We are the best light weight CZPT manual lift mechanisms, mini screw jacks heavy duty manufacturer and supplier in China. Visit https://screw-jacks.en.made-in-china.com to learn more about light weight CZPT manual lift mechanisms, mini screw jacks heavy duty.

Features
1. Upright or inverted installation with maximum static load capacity 2.5 kN (250 kg)
2. Self-locking machine screw with no need brake or lock mechanisms to hold position. 
3. CZPT screw diameter 14mm, pitch 4mm (single start acme thread).
4. Available in 5:1 and 20:1 ratios.
5. CZPT ize travel length, max. 1500mm with tension load. 
6. Translating screw (travelling screw jack), keyed screw for anti-rotation (keyed screw jack), and rotating screw (travelling nut screw jack) as the standard configurations.
7. Mini manual screw jack with 125mm diameter handwheel. Option mini electric screw jack with small motor, but can not directly coupled with motor flange, ONLY connection by coupling for foot mounted.
8. Individually mini screw jack use, or mini screw jack lift system, linked by couplings, connecting shafts, mini bevel gearboxes with 1:1 ratio.

Structures and CZPT
1. CZPT ing screw material – C45 steel
2. Worm (input shaft) material – C45 steel
3. Worm gear material – bronze
4. Housing (gearbox) material – ductile iron, or aluminum
5. Traveling nut – bronze  

Specifications
The mini screw jack specifications include maximum load capacity, worm screw diameter and pitch, CZPT ratio, allowable maximum input CZPT , torque and speed and overall efficiency etc. 

1. Conditions: 20% running time/60 minutes or 30% running time/10 minutes, 20 °C ambient temperature. CZPT imum allowable input CZPT 0.18kw, when your selection is exceed the maximum input CZPT , the operational restrictions due to thermal limits. you will need to choose the bigger size screw jacks in order to allow effective heat dissipation. 
2. H=high ratio 5:1 (0.8mm stroke for one input turn), L=slow ratio 20:1 (0.2mm stroke for one input turn).
3. Nm=input torque required, kW=input CZPT required. 
4. Selection of mini screw jack using above figures should only be carried out in consultation with CZPT engineers.

Assembly Drawings
Find out mini screw jack CZPT view, side view and top view assembly drawings. About 2D CZPT cad dwg, dxf assembly drawings, and 3D stp, step, model, igs, prt or catpart assembly drawings, please contact us directly.

Shipment and Packing Pictures 
Shipping:
1. CZPT freight: seaport to seaport, price terms CIF, FOB, EXW, CFR etc.
2. Air freight: airport to airport, price terms EXW, CRF etc.
3. Air courier: DHL, FEDEX, UPS, TNT door to door shipment, price terms DDU, CPT etc.
Packing: 
100% standard exporting plywood cases. 
Note: International Exporting Standard CZPT Material with Free Fumigation.

JACTON Advantages
1. CZPT standard materials for All CZPT TON brand products. We insist on choosing brand suppliers to supply the high quality raw materials to control the producing process. Optimization constantly the production processes, inspecting in each link and managing production site.
2. 100% quality assured with double quality inspections. The quality inspection by quality inspectors from processing to finished products as the first time. Before packing, the corresponding sales engineers must inspect the orders following the paper drawings, order quantities and special markings in the invoice or sales contracts as the CZPT time. After that, fill in the inspection report with signature and company stamp.
3. 100% safety transportation. Packing with strong standard export plywood cases materials (free fumigation), inner packing with epe foams to prevent products swaying and outer packing with iron sheets and CZPT eners to CZPT en the packages.
4. Internationl sales engineers have professional knowledge and skills on CZPT standard products and service. They have enough ability to solve the basic technical problem immediately whatever by phone, online chat, face to face communications.
5. All the standard products with 2D CAD Drawings (PDF, DWG and DXF formats), and 3D CAD Models (STEP, STP, MODEL, IGS, PRT and CATParT formats).
6. CZPT design CZPT , CZPT service CZPT , Free CZPT advice, Free quotes CZPT and CZPT er label CZPT .
7. Inspection equipments include motor with inverter drive system, height adjustmemt motorized lifting system, coordinate measuring machines, outside micrometers, inside micrometers, depth calipers, vernier calipers, digital calipers, hardness testers, digital noise meters, industrial infrared thermometers, digital speed measuring instruments, digital multimeters, and high precision clamp digital ammeter etc. 
8. Processing with modern CZPT d machines such as CNC gear hobbing machines, CNC flank grinding machines, CNC cylindrical grinding machines, multi-axis CNC milling machines, CNC lathes and others equipments.

Finished Projects
1. Theatrical solutions stage and orchestra platform lifts projects. CZPT ers are from France, Australia, Netherlands, CZPT CZPT dom, Spain and Canada. 
2. CZPT electric CZPT station projects and water conservancy projects. CZPT ers are from Vietnam, Australia, Malaysia, Russian Federation, Nepal, Pakistan, Belgium, CZPT States and CZPT CZPT dom. 
3. Aircraft maintenance platforms and docking systems projects. CZPT ers are from Pakistan, Singapore and CZPT Arab Emirates.  
4. Solar panel tracking system projects. CZPT ers are from Spain, India and Canada. 
5. Bolted steel storage tanks and silos lifting solutions. CZPT ers are from South Africa, CZPT States, Mexico, Russian Federation, Brazil and Vietnam. 
6. Dish antenna elevation and azimuth positioning projects. CZPT ers are from Singapore, Malaysia and CZPT States. 
7. Railway wagon projects. CZPT ers are from South Africa. 
8. Beverage can production lines. CZPT ers are from Netherlands, CZPT States, Thailand and Indonesia. 
9. Steel factories production lines. CZPT ers are from Iran, CZPT States and Turkey. 
10. Continuous PU sandwich panel production lines. CZPT ers are from Thailand and CZPT CZPT dom.  

JACTON CZPT ers Areas(Countries)
1. American Countries: United States, Mexico, Canada, Chile, Xihu (West CZPT ) Dis.via, Brazil, Colombia, Dominican Republic, Honduras, Costa Rica, Panama, Puerto Rico, Jamaica, Trinidad and Tobago, Aruba, Argentina, Peru, Venezuela.
2. European Countries: Russia, Germany, Turkey, France, CZPT CZPT dom, CZPT , Spain, Ukraine, Poland, CZPT ia, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Belarus, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Croatia, Georgia, Armenia, CZPT uania, Slovenia, Estonia, Cyprus, Luxembourg, CZPT land.
3. Asian Countries: Malaysia, Indonesia, Singapore, Pakistan, Philippines, Vietnam, CZPT Arab Emirates, Thailand, Saudi Arabia, Iran, Turkey, India, Nepal, Yemen, ZheJiang , Sri Lanka, Israel, Jordan, Kuwait, Qatar.
4. Oceanian Countries: Australia, New Zealand, Fiji.
5. African Countries: South Africa, Egypt, Ethiopia, Nigeria, Kenya, Tanzania. 

JACTON Products List
1. Manual CZPT Jacks, CZPT ctric CZPT Jacks.
2. Screw Jacks Series: JT series acme screw jacks, JTC series cubic screw jacks, JTW series machine screw jacks, JTM series worm screw jacks, JTB series ball screw jacks, JTD series cubic ball screw jacks, JSS series stainless steel screw jacks, JTS series bevel gear screw jacks, CZPT -standard series screw jacks. 
3. Bevel Gearboxes Series: JT series bevel gearboxes, JTP series cubic bevel gearboxes, JTA series aluminum bevel gearboxes, JTH series hollow shaft bevel gearboxes, BSS series stainless steel bevel gearboxes.  
4. Lifting Systems and Systems Accessories: two-jacks systems, three-jacks systems, four-jacks systems, six-jacks systems, eight-jacks systems. Accessories cover couplings, CZPT joints, cardan shafts, connecting shafts, electric motors, geared motors and reducers, hand wheel with crank handles, pillow block bearings, flange block bearings, rod end bearings, stop nuts, limit switches, safety nut, travel nuts, linear shafts and bearings, linear guides and bearings, telescopic spring covers, bellows boot, protective tube, trunnion adapter plates, trunnion mounting brackets, motor flanges, rotary encoders, potentiometers, frequency inverters and position indicators etc.
5. Electric CZPT Actuators Series: Parallel heavy duty linear actuators, In-line heavy duty linear actuators.
6. Geared CZPT s and CZPT Reducers Series: helical gearmotors R series, CZPT cal bevel gearmotors K series, parallel shaft CZPT cal gearmotors F series, CZPT cal CZPT motors S series, small AC gear motor series and CZPT motor reducer series.

Contact Information
JACTON Industry Co.,Ltd (VAT No.: 9144190007026567X3, registered Capital 500000CNY) is a leading manufacturer and supplier of  Screw Jacks (Mechanical Actuators), Bevel Gearboxes, CZPT ing Systems, CZPT ctric CZPT Actuators, Gearmotors and CZPT Reducers, and CZPT s CZPT Motion and CZPT Transmission Products in CZPT .  We are Alibaba, Made-In-China and SGS (Serial NO.: QIP-ASI192186) audited manufacturer and supplier. We also have a strict quality system, with senior engineers, experienced skilled workers and practiced sales teams, we consistently provide the high quality equipments to meet the CZPT ers electro-mechanical actuation, lifting and positioning needs. CZPT TON Industry guarantees quality, reliability, performance and value for today’s demanding industrial applications.
Website (English): screw-jacks.en.made-in-china.com
Website (English): screw-jacks.en.made-in-china.com
Website (Chinese): screw-jacks.en.made-in-china.com