1695 Cheap Scfm Capacity Air Compressor Filter Particulate Air Filter with ce certificate top quality low price

Product Description

The New CZPT Housing has been redesigned to reduce differential pressure loss which, when combined with the new element design, significantly improves air flow and performance, making the YUKA one of the most energy efficient filter housings CZPT .

Feture & CZPT efit

Flexible Installation
Available in 1/2″ to 4″ threaded Rc or NPT port sizes, with flow rates of 35.3 – 1695 SCFM (1.0 – 48.0 Nm³/m).

Maximum temperature of up to 80°C (176°F) and maximum operating pressure of up to 10.0 barg (143psig), dependent upon filter

model configuration.
 

Modular CZPT
Low cost connecting kits and new filter head design enables easy and simple close coupling assembly to accommodate a

wide range of application requirements.
 

Flow-optimised Design
Advanced filter design to optimise flow capabilities, significantly reducing pressure loss and therefore increasing

energy efficiency.
 

Reliable CZPT Performance
Independently tested and validated in accordance with ISO 12500-1 & ISO 8573-1: 2571, YUKA CZPT

filter housings and elements are manufactured using only the highest quality materials to provide optimum performance and

improved efficiencies.
 

Low Total Cost of Ownership
Introducing new deep pleated media technology across Alpha elements; a step change in performance,

combined with a CZPT engineered anti re-entrainment layer for exceptional oil coalescence – providing a saturated differential pressure

of less than or equal to 205 mbar.

Filter CZPT ment Performance

PF AO AA AX ACS AR AAR
As a primary filter, particles whose diameter more than 5μm can be remove,the maxi. residual oil content is negligible High efficiency general protection, dust particles, water mist & oil mist whose diameter more than 1μm can be removed, the residual content of oil mist does not exceed 0.6mg/m³ (21ºC),1ppm(w). High effiency oil remove filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.01mg/m³(21ºC),0.01ppm(w) Ultra-efficient filtration, dust particles, water mist&oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.001mg/m³(21ºC),0.001ppm(w) Dust particles whose diameter more than 0.01μm, oil vapor &odor can be removed, the maxi. resident content of oil vapor does not exceed 0.003mg/m³(21ºC),0.003ppm(w) Dust particles whose diameter more than 1μm can be removed Dust particles whose diameter more than 0.01μm can be removed

International test and measurement standard ISO12500
>ISO 12500 has made clear a general test and definition method for the compressed air filter manufacturers. The main performance
parameters are the air inlet oil content and particles size distribution of the solid particles.
>ISO12500-1 specifies the test requirements for the filtration performance of oil aerosol in the coalescing filter.
>ISO12500-2 specifies the test requirements of adsorption filters for the removal performance of steam adsorption.
>ISO12500-3 specifies the requirements for removal of particulate matter from solid pullutants.

Product are test with the international CZPT d testing equipment based on standard ISO12500, Which is equivalent to the standard ISO8573.1-2571 quality standard,  and provide filter performance test report.

Filtration Grade  PF AO AA AX ACS AR AAR
Size of solid particles(ISO12500-3) 5μm 1μm 0.01μm 0.01μm 1μm 0.01μm
Filtration performance of solid particles(ISO12500-3) 99.999+% 99.999+% 99.999+% 99.999+% 99.999+% 99.999+%
Filtration performance of oil(ISO12500-1) 50% 80+% 99.9+% 99.99+%
Residual oil content(ISO12500-1) 5mg/m³ 0.6mg/m³ <0.01mg/m³ <0.001mg/m³ <0.004mg/m³

 

 

                                                                                                       
 

Technical Specification
The flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g).
For application in other working pressure, please refer to the correction factors.

Model Pipe size Flow rates Dimension (mm)
L/S m3/min scfm W(Width) D(Depth) H(Height) A B C(clearance for housing)
YF571 RC1/2″ 16.7  1.0  35.3  96 79 261 29 198 118
YF571 RC3/4″ 25.0  1.5  53.0  96 79 261 29 198 118
YF030 RC3/4″ 30.0  1.8  63.6  96 79 295 29 233 153
YF040 RC1″ 33.3  2.0  71.0  96 79 295 29 233 153
YF060 RC1″ 60.0  3.6  127.0  138 111 403 37 296 208
YF070 RC1″ 83.3  5.0  177.0  138 111 503 37 396 303
YF080 RC1-1/2″ 125.0  7.5  265.0  138 111 503 37 396 303
YF090 RC2″ 166.7  10.0  353.1  174 142 736 58 607 469
YF100 RC2-1/2″ 216.7  13.0  459.0  174 142 736 58 607 469
YF110 RC2″ 283.3  17.0  600.0  174 142 1016 58 887 794
YF120 RC2-1/2″ 316.7  19.0  671.0  174 142 1016 58 887 794
YF130 RC3″ 416.7  25.0  883.0  220 184 793 74 649 514
YF140 RC4″ 466.7  28.0  989.0  220 184 793 74 649 514
YF150 RC3″ 683.3  41.0  1448.0  220 184 1050 74 906 764
YF160 RC4″ 800.0  48.0  1695.0  220 184 1050 74 906 764
Technical requirements Maximum operating pressure: 10 barg   Operating temperature: 1.5°C~80°C.

Pressure Barg 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Psig 15 29 44 59 73 87 100 116 131 145 160 174 189 203 219 232
Correction factor 0.38 0.53 0.65 0.76 0.85 0.93 1.00 1.07 1.13 1.19 1.23 1.31 1.36 1.41 1.46 1.51

                                                                                 

Replacements and spare parts

Product Application

YUKA Certificates

YUKA Patents

YUKA Factory

YUKA Facility

YUKA in ZheJiang ComVac Asia & Hannover Messe Exhibition
What’s YUKA Advatage?

1. Compressed air National standard founder;
2. Build a laboratory with HangZhou University;
3. With many patents and strong R&D ability;
4. CZPT d thread processing technology and testing equipment

What’s YUKA Product Advatage?

1.15 years serve life for filter housing under working condition from temperature 1.5~80ºC. CZPT i. Pressure is 1.0Mpa.

2. 6000~8000 hours serve life for filter element,filtering performance up to 99%
3. Integrated die-casting filter up to 4 inch,flow rate up to 48m³/min;
4. Effectively filter solid particles up to 0.01 microns, suspended oil up to 0.003 mg/m³;
5. 7 filter element filter levels to meet different needs;
6. Surface anti-corrosion treatment increases wear resistance and the corrosion of the shell is low;
7. Equipped with an external drain to effectively remove condensate;
8. Sight CZPT shows the drainage inside the filter;
9. The presence of a pressure indicator indicates when the filter element should be replaced;
10. The filter element can be replaced without the intervention of third-party personnel and special tools;
Ability to install filters on the wall;
11. Less pressure drop when the airflow passes.